About Aquaferrox®

  • Enables the sustained immobilization of dissolved heavy metal and metalloid ions/complexes in groundwater by adsorption.
  • Enables a long-lasting immobilization effect due to the high adsorption capacity and thermodynamic stability of the goethite particles,
  • Is ecotoxicologically safe.
  • Can be injected with standard direct-push systems.

Iron oxides are naturally occurring minerals that form in soils and sediments from the weathering products of Fe-bearing minerals. They have a high specific surface area and a characteristic red/orange color. Iron oxides act as key reactive components in soils and are also responsible for the typical brown coloration of our soils. In industry, iron oxides are used in particular as pigments and as adsorber materials for the immobilization of contaminants.

Aquaferrox® consists of specially prepared goethite particles which – stabilized in colloidal form – are injected into the subsoil. After controlled dispersion, they are immobilized on the aquifer matrix, thus forming an in situ adsorption barrier through which groundwater flows. Due to the high affinity of Aquaferrox® for heavy metals and semi-metals (e.g. As), these contaminants can be immobilized on site without resorting to energy- and cost-intensive measures such as pump-and-treat, excavation or soil washing.

Properties

Patents EU‐Patent 2 334 608,
DE‐Gebrauchsmuster 20 2017 001 526.9
Specific Surface area 120-200 m2/g-1
Particle Size ~ 2 µm
Concentration ~ 100 g Particle L-1
Components
  • Specially treated iron oxide (goethite, α-FeOOH)
  • Polymer-based stabilizer
  • Water

Adsorbent for metalloids
and heavy metals

Through a special treatment of conventional iron oxides, the iron oxide aggregates in Aquaferrox® are colloidally stabilized and achieve higher adsorption capacities than untreated or conventionally ground iron oxides. Accordingly, at concentrations of 1 mg As L-1 in groundwater, about twice the As loadings to Aquaferrox® can be expected compared to counterparts without this special treatment.

Iron oxides predominantly exhibit their point of zero charge (isoelectric point, IEP) between 7 ≤ pH ≤ 8, i.e., at pH < IEP they exhibit a net-positive charge and at pH > IEP a net-negative surface charge. Thus, adsorption of anions (e.g., dissolved As complexes in groundwater) is electrostatically favored at pH < IEP, while at pH > IEP As adsorption is less effective. This pH dependence of adsorption plays a minor role with Aquaferrox®. Due to the special treatment, the surfaces of the iron oxide particles in Aquaferrox® have a net-negative charge (higher number of negatively charged vs. positively charged surface sites; UE = -38 ± 3 mV in Table 1) even at comparatively low pH values (pH < 7). Despite this net-negative charge on the surfaces of the iron oxide particles in Aquaferrox®, higher adsorption intensities were nevertheless obtained compared to the iron oxides without special treatment but net-positive surface charge (pH = 5.7, i.e. pH < IEP; Figure 1). Temporary fluctuations in groundwater pH to values >7-8 are therefore, in contrast to the conventional iron oxides, less critical with regard to the adsorption performance of anions such as dissolved As species in the groundwater.

Figure 1: As-loadings (Asadsorbed) under equilibrium conditions on Aquaferrox® compared to iron oxides (FeOx) without special treatment (without or with conventional grinding) as a function of the As concentration in themobile phase (Aseq). Background solution: synthetic groundwater with inorganic cations and anions. Marker: observed values. Graph: fitted Freundlich-isotherms.

Characteristics and properties of Aquaferrox® suspension

The Aquaferrox® suspension contains ~2 μm goethite aggregates, which significantly facilitates the handling and controllability of their actual injection into aquifers etc. In the form in which Aquaferrox® is injected into the subsurface – experience has shown it to be a ~1% (m/V) iron oxide suspension – Aquaferrox® has a comparably low ionic strength, which is driven by ionic co-formulants from the synthesis. Consequently, the electrical conductivity is similar to that of natural groundwaters.

The individual constituents in Aquaferrox®-water, goethite and an organic stabilizer- are ecotoxicologically safe.

Get in touch with us without obligations

Just use the form below and we will be happy to get back in touch with you. If you have a question directly, you can also reach us by phone at +49 201 858 958-0

    discover more
    intrapore® products

    Intrasorp®

    Rapid and sustained in situ immobilzation of organic contaminants

    On a sustainable basis: Intrasorp® can be precisely adapted to the different adsorption behaviour of the respective pollutants. MOHCs, BTEX, PAH and many other organic pollutants can thus be quickly and permanently immobilised and removed from the downstream groundwater flow.

    More information about Intrasorp®

    CarboIron®

    For the degradation of halogenated pollutants

    CarboIron® is the sustainable and exceptionally effective alternative to conventional iron – and this applies with equal regard to mobility during injection, sustainable reactivity and effectiveness. Organic halogen pollutants such as PCE and TCE are effectively and permanently immobilised, being fully degraded into ethene and ethane.

    More information about CarboIron®

    TrapOx®

    For the treatment of persistent pollutants

    With TrapOx®, combined adsorption and reaction zones can be created in which especially persistent pollutants can be enriched and degraded on a successive basis.

    The preferred areas of application include effluent plumes of persistent organic pollutants such as phenols, large PAH molecules, halogenated hydrocarbons such as dichloromethane and chlorobenzene, or MTBE.

    More information about TrapOx®

    Intraplex®

    Rapid and sustained in situ PFAS immobilization

    PFAS remediation places the highest demands on the in situ materials. With Intraplex® activated carbon, Intrapore offers a colloidally stabilized suspension that is injected directly into the contaminated aquifer, where it rapidly and permanently immobilizes PFAS.

    More information about Intraplex®